Lapidary Techniques: Demo, How to Start, and Stone Sale

November Speaker Series: Dave Duncan Lapidary Demo and Stone Sale
Friday Night Nov 15, 2019
7-9 pm
Creator Haven
41B Hangar Way, Watsonville

David Duncan

Dave Duncan is a long-time member of the Santa Cruz Mineral and Gem Society. He can often be found at their lapidary shop on Saturday mornings, making unique cabochons and helping newcomers to lapidary learn their way around the equipment.

Dave will give a demo of basic lapidary techniques, answer your questions about how to get started in lapidary work, and discuss essential equipment.

After his talk, Dave will have a selection of his best cabochons available for sale. Don’t miss this chance to learn from a pro and to add to your stash at the same time!

This event was held at Creator Haven, LLC, 41B Hangar Way, Watsonville, CA on Friday, Nov. 15 from 7-9 pm. Light refreshments will be served.

Winter Party 2019


Merry Lee Rae, featured speaker for the MBMAG Winter Meeting and Potluck Party

SAVE THE DATE
Sunday, JANUARY 27th, 2019
Winter Meeting and Potluck Party
Haute Enchilada, Moss Landing 

Join us for good food, fellowship, an inspiring talk by Merry Lee Rae, and take part in The Monterey Bay Metal Arts Guild 2ndAnnual Challenges!

Challenge #1: Scavenger Hunt

Create a wearable item (i.e., necklace, ring, brooch, tiara, etc.) containing at least 5 of the 8 items in the list.

Must contain something with*:

A hole in it;

Words/letters

With stripes

That hangs

With a square corner

A textured surface

Fabric

Yarn

*An item can include more than one requirement.

Finished item must be primarily metal. 

Materials list:

Your choice of metal: copper. Silver brass, etc.

Sheet

Wire

Chain

May be soldered or cold-connected

An entry fee of $5.00 will be collected at the time of delivery (the Winter Party).

Items will be voted on by the members at the Winter Party.  The winner of the most votes will receive 50% of the collected fee; the second winner will receive 30% and the third winner will receive 20%.  The entrants may keep the finished piece.

Challenge #2: Unfinished Symphony

Yes, we all have them – that piece that has been sitting on your bench or in the “projects” pile and you are tired of looking at it.

Bring it to the Winter Partywhere another member will select it, finish it, and bring the finished piece tothe Summer Party.  There it will be auctioned as a fund-raiser for the Guild.

The finished work must be wearable, i.e., necklace, ring, brooch, tiara, etc.

MBMAG Monthly Speaker Series: October 2018

POSTPONED TO 2019

Due to unforseen circumstances, the MBMAG Speaker Series has been postponed

Panel Discussion and Q&A:
How to Use Instagram to Promote Your Brand,
Sell Your Jewelry, and Purchase Supplies

Our apologies for the change. There will be no speaker this month.

Join us on November 9 when Bob Boscarelli will be our featured speaker

instagram screenshot

MBMAG September Speaker: Sky Paxton- All About Agates, Sept. 21, 2018 from 7-9 pm, Moss Landing

Lapidary and jeweler Sky Paxton will share his love and knowledge of agates with us on Friday, Sept. 21, 7-9 pm at the Moss Landing Harbor Master’s Office.

Sky will share slides with examples of various types of agates, locations where they are found and some factors that affect prices.

He’ll also give us some tips on hardness and cleavage planes of popular stones which affect their use in certain types of settings.

Sky has been working with stones for many years, so bring your questions about working with these varied and beautiful stones.

This meeting is free and open to the public.

The address is 7881 Sandholdt Road, Moss Landing.  After you enter the driveway to the Harbor parking lot go to the building all the way to the end of the parking lot on your right, “Harbor Master’s Office”.

MBMAG Monthly Speaker Series: Wendy Ballen

Wendy Ballen: Tying it All Together

Friday, July 20, 2018, 6:30-8:30 PM

Don’t miss this month’s MBMAG Speaker Series featuring wire sculptor Wendy Ballen.

We’ll be meeting at the Santa Cruz Art League, 526 Broadway, Santa Cruz

Wendy Ballen is a wire sculptor and guild member

Join us for a peak into what she’s been working on….

The event is free and open to the public

June 2018 Speaker

calipers, pliers, graver and hammer surround the Speaker Series announcement for the Monterey Bay Metal Arts Guild

MBMAG Speaker Series

Friday, 7-9 pm, June 18, 2018

Lynette Cederquist: Maximize Your Jewelry Display

Lynette Cederquist

It’s summer, and that means festivals, shows and events where you’ll need to display your jewelry. Lynette Cederquist will share her many years of experience at displaying her own work and organizing shows to help you create displays that show your work to best advantage and also encourage sales!

She’ll share some tips on displaying your jewelry to advantage for photography. 

We’ll follow Lynette’s talk with an interactive discussion of your tips and tricks, plus time for feedback on a few of the audience members’ displays. 

Send in photos of your displays and indicate whether you want to share a tip/trick, or if you want feedback on your display. 

The talk will be held at Creator Haven, LLC, on June 22, 2018 from 7-9 pm

Light refreshments will be served

Creator Haven is located at 41B Hangar Way, Watsonville, CA 95076

MBMAG Monthly Speaker Series: Paul Kmetko

calipers, pliers, graver and hammer surround the Speaker Series announcement for the Monterey Bay Metal Arts Guild

Friday, May 18, 2018 7-9 PM

MBMAG Speaker Series:

Paul Kmetko: Stenciling on Enamel -Tips and Easy to Make Tool

Stencils are commonly used in enameling and they can be tricky to manipulate. Nothing is worse than carefully applying powder to your design and jostling the stencil whilst trying to remove it… Not only does it waste precious material, it can be very frustrating.

In addition just laying a stencil down on top of the work doesn’t guarantee a snug fit and powder will creep under boundary zones. In order to solve the problem I went back to my roots in screen printing and devised a solution that solves both problems at once. It started as a low tech device with a easily  available clamp fixture that can be modified with minimal effort by almost anybody.

Paul will share this device and how to make a low-tech version of it, as well as giving tips on stenciling on enamel at this month’s MBMAG Speaker Series.

Stenciled Enamel Dish by Paul Kmetko

Paul is  a silver smith, enamel artist and the owner of Seabright Metalworks in Santa Cruz.

Creator Haven LLC is at 41B, Hangar Way, Watsonville, CA

MBMAG Monthly Speaker Series: Don’t Miss it!

calipers, pliers, graver and hammer surround the Speaker Series announcement for the Monterey Bay Metal Arts Guild


Paul Kmetko
New Tools for Stenciling on Enamel

Friday 7 – 9 pm, March 18, 2018

at Creator Haven LLC
41B Hangar Way, Watsonville, CA

Stenciled Enameled Dish by Paul Kmetko

Stencils are commonly used in enameling and they can be tricky to manipulate. Nothing is worse than carefully applying powder to your design and jostling the stencil whilst trying to remove it… Not only does it waste precious material, it can be very frustrating. In addition just laying a stencil down on top of the work doesn’t guarantee a snug fit and powder will creep under boundary zones. In order to solve the problem Paul went back to his roots in screen printing and devised a solution that solves both problems at once. It started as a low tech device with a easily  available clamp fixture that can be modified with minimal effort by almost anybody. 

Paul will share this device and how to make a low-tech version of it, as well as giving tips on stenciling on enamel at this month’s MBMAG Speaker Series.

Paul Kmetko is a silversmith, enamel artist and the owner of Seabright Metalworks in Santa Cruz.

Creator Haven LLC is located at 41B Hangar Way, Watsonville, CA 95076

MBMAG Monthly Speaker Series

calipers, pliers, graver and hammer surround the Speaker Series announcement for the Monterey Bay Metal Arts Guild

Pablo Cubangbang
Road to Metal Artist

Friday 7 – 9 pm, March 23, 2018

at Creator Haven LLC
41B Hangar Way, Watsonville, CA

filigree earrings by Pablo Cubangbang
filigree heart pendant by Pablo Cubangbang
Pablo Cubangbang

Join your fellow MBMAG members next Friday, March 23, from 7-9pm  for a fun, interesting evening with speaker Pablo Cubangbang. A popular teacher and artist with a background in drawing and painting, Pablo will be discussing how he came to metalsmithing, as well as discussing and showing examples of his current work. 
Light refreshments will be served. 

Pablo Cubangbang was born in a small town in the Philippines. He has acquired many skills in jewelry making from workshops and Cabrillo College where he was mentored by Dawn Nakanishi. In a workshop by Dr. Yehuda Tassa, he learned the basic filigree process and fell in love with it and has since continued to hone his filigree art in his small studio. Pablo received multiple Visual Arts Scholarships for his jewelry and watercolor pieces. Pablo is a member of the Monterey Bay Metal Arts Guild and is the president of the Cabrillo Seahawk Metal Arts Club.

Third Friday Speaker Series: Metal Clay Demo with Pat Evans

dragon fly brooch of fine silver with sapphires by Pat Evans

Friday, February 15, 2018 7 – 9pm

Free and open to the public

Have you been curious about metal clay? Do you think it’s just for hobbyists? Or have you never even heard of it? This product, a combination of recycled silver and organic binders, can be worked like clay and, when fired, is (depending on the variety) pure fine silver, sterling silver, copper, bronze or even steel. Pat Evans, Senior Art Clay Instructor, will demonstrate the basics of working with several varieties of metal clay, and explain how it can be a useful addition to your jewelry-making toolkit.

Join us at the Soquel Glenn Mobile Home Park Clubhouse

details of a speaker presentation by Pat Evans on silver metal clay
VenueSoquel Glen Mobil Home Park Clubhouse
Address5470 Soquel Drive
Soquel CA 95073, US
StartsFri Feb 16 2018, 7:00pm PST
EndsFri Feb 16 2018, 9:00pm PST